Windows Integration Form - DTR Business Systems

First Name

Last Name

Company Name

Type an identifying phrase so we will know which system or site this info applies to (eg end-user company name, address, and/or server function):

Please indicate the Operating System that we should install:

Windows 2022 Server

Windows 2019 Server

If disks are in a RAID array, setup this RAID level:

RAID-1 (mirror protection)

RAID-10 (mirror protection + striping for performance if 4 or more drives, a.k.a. RAID 0+1)

RAID-5 (data protection at lower cost but lower performance than RAID-1 or 0+1)

N/A (I'm sure there is no RAID to be setup)

Setup one drive as a HotSpare StandBy drive

No Yes

Note: lower end SAS/SATA raid often has no audible alarm if a drive fails

Disk Drive 0 (Or Array 0 If Raid) (Where The Operating System Will Be Installed)

Size of C: in GB (minimum recommended 140 GB) or enter "all" to use the whole disk except as noted below

Name(s) of other drive letters on drive 0 (and size in GB or % allocation of remaining disk space), if any (e.g. D: 50%, E: 50%) Note: A RAID subsystem will usually be setup as one large array 0. If so, leave the following drive questions blank.

Desired Drive Letters (And % Allocation)

Drive 1

Drive 2

Drive 3

Drive 4

What percent of disk drive space do you want to reserve for shadow copies and allowing restore of old versions of files (DTR recommends 1% to 3%)

Enter the desired computer name for this system (default: win200Xsvr, e.g. win2003svr)

Administator password (at least 8 chars w/ upper, lower, digits, and punctuation)

Primary NIC Card (Ethernet)

Check this to get dynamic IP info via DHCP and ignore the following 4 items:

No Yes

IP Address

Network Mask

Default gateway or leave blank to set this later

DNS server or leave blank to set this later

RMM NIC (for out-of-band system health monitoring, if any)

RMM IP Address

Secondary NIC Card (If Any)

Check this to get dynamic IP info via DHCP and ignore the following 2 items:

No Yes

IP Address (cannot be in same subnet as first NIC)

Network Mask

VMWare IP Address (only if running under VMWare)

Will this system be the Primary Domain Controller?

Yes

Domain Name for a Primary Domain Controller, enter a fully qualified domain name (e.g. systemname.mydomain.local)

Enter any other special instructions or requests: (Please press ENTER at the end of each line so no line is too long. You may copy/paste into this box as it will hold thousands of characters of input.

Please review all of the above information and then click the Submit button to send it to the DTR Integration group. You do not need to do anything further after you click Submit below.