OpenServer 6.0 Integration Form - DTR Business Systems

First Name

Last Name

Company Name

Type an identifying phrase so we will know which system or site this info applies to (eg. end-user company name, address, and/or server function)

Enter the desired system name (max 8 characters, no punctuation or spaces)

Enter the desired DNS domain name

Disk Drive 0 (Or Array 0 If Raid) (Where The Operating System Will Be Installed)

GB: Size of root filesystem in GB (minimum 5 but 10 GB recommended)

MB: Size of SWAP in MB or enter "default" to use DTR recommendations:

DTR Recommendations:
256 MB RAM => 512 MB swap
512 MB RAM => 1024 MB swap (1 GB)
1 GB RAM => 1536 MB swap (1.5 GB)
2 GB RAM => 2048 MB swap (2 GB)
4 GB RAM => 3072 MB swap (3 GB)
Note: some applications recommend additional swap space per user

Size of /u in GB or % allocation of the remaining disk 0 space to use (e.g. 50%) default is 100%

MB: Enter size of /tmp in MB if you want /tmp to be a separate memfs filesystem, which will provide fast access to /tmp since it will be memory resident BUT all files & directories in /tmp will disappear every reboot. /tmp must be memfs to use emergency_disk (but not BackupEDGE or Lone-Tar). Leave this field blank to make /tmp part of the root filesystem on disk, which is the DTR default recommendation.

MB: Enter size of /var/tmp in MB if want /var/tmp to be a separate memfs filesystem for better performance and auto-clear on reboot if you add system packages a lot. If both /tmp and /var/tmp are memfs, they will share the combined memory. Leave this field blank to make /var/tmp part of the root filesystem on disk, which is the DTR default recommendation.

Enter the mount point(s) and % allocation of disk 0 to use for up to 6 other filesystems on drive 0 in addition to /u.

Note: A RAID subsystem will usually be setup as one large array 0. If so, leave the following drive questions blank.

Desired Drive Letters (And % Allocation)

Drive 1 (or Array 1 if raid) (if present)

Drive 2 (or Array 2 if raid) (if present)

Drive 3 (or Array 3 if raid) (if present)

Drive 4 (or Array 4 if raid) (if present)

Primary NIC Card (Ethernet)

IP Address

Network Mask

Default gateway or leave blank to set this later

DNS server or leave blank to set this later

RMM NIC (For Out-Of-Band System Health Monitoring, If Any)

RMM IP Address

Secondary NIC Card (If Any)

IP Address (cannot be in same subnet as first NIC)

Network Mask

VMWare IP Address (only if running under VMWare)

Root Password (should not be a dictionary word or name)

Email subsystem

mmdf

sendmail (DTR default)

If Any Digi PortServers Are On The Order

Install RealPort SW

No Yes

IP, NetMask, Gateway for first PortServer (Add IP, NetMask, Gateway for other PortServers under Special Instructions below)

Note: Extra-cost packages (such as BackupEDGE, Development System (C compiler), Lone-Tar, Merge, and SMP) are not listed above. They will be installed automatically if you have purchased them with this system.

Enter any other special instructions or requests: (Please press ENTER at the end of each line so no line is too long. You may copy/paste into this box as it will hold thousands of characters of input.

WARNING: If you order an upgrade or crossgrade SCO license, you must also enter the old SCO license that is being upgraded and replaced by the new system. SCO does not allow a grace period for running the old system and the new system in the network at the same time, so migration and testing may fail due to licensing violations. You may request a demo license for the new system in the special instructions field above to provide a grace period. Then you must install the real licenses when you go live. Usually a demo license can only be selected when SCO is initially installed from scratch.

Please review all of the above information and then click the Submit button to send it to the DTR Integration group. You do not need to do anything further after you click Submit below.